Tile Redi Shower Pans are UL listed and have been tested to for compliance with various standards and codes  set forth below are some of the certification, tests and standards applicable to our Tile Redi products:

Tile Redi shower pans are UL Listed (Underwriters Laboratory) as plastic plumbing fixtures. Tile Redi shower pans comply with and are intended for installation in accordance with local model plumbing codes such as the Uniform Plumbing Code (UPC) and the International Plumbing Code (IPC).

Tile Redi shower pans meet the following standards and requirements in the United States:

USL - United States Standard
ANSI Z124.2-95
ICC/ANSI A117.1-98
ASTM F462-79

Tile Redi shower pans meet the following standards and requirements in Canada:

CNL Ð Canadian Standard
(CSA Standards No. B45.0-02 and B45.5-02)

Tile Redi has had a one hour fire penetration test relating to the substrate on which the shower pan is installed. Please click here for the UL one hour Fire Penetration test.

Tile Redi has had a two hour fire penetration test relating to the substrate on which the shower pan is installed. Please click here for the UL two hour Fire Penetration test.

Tile Redi shower pans are manufactured using BAYDUR 645 polyurethane manufactured by Bayer Material Science.  For the product information on BAYDUR 645, please click here.

The Tile Ready shower pans require an epoxy setting material to set the tiles on the shower pan surface. Tile Redi has had Laticrete test the Laticrete 300 Epoxy to confirm the bonding strength of the tile to the Tile Ready shower pan meets or exceeds the adhesion requirements of the National Tile Council Of America and relevant local codes, and the shear bonding testing performed by Laticrete confirms that Laticrete 300 Epoxy meets or exceeds all bonding requirements. For product information on Laticrete 300 Epoxy, please click here.